Blue Cat's All Plug-Ins Pack 2020.10 Full VersionBlue Cat’s All Plug-Ins Pack 2020.10 Preactivated is a complete professional digital audio processing environment in a single bundle, with the complete collection of Blue Cat Audio’s commercial audio plug-ins and applications. This package contains a wide range of premium modulation effects, a guitar amplifier simulator, a single and two-channel equalizer, and a unique controllable gain array, plus a professional spectrum analyzer.

Blue Cat’s FreqAnalyst Multi is a unique multiple track real time spectrum analyzer: it lets you visualize the spectral content of several audio tracks on the same screen with extreme smoothness and high resolution, for both time and frequency. It is the ideal solution for mixing: you can use it as a frequency overlap detector and actually see which part of the spectrum every single instrument uses. It is now also possible to easily compare the spectrum of several instances (for EQ matching or response curve measurement) thanks to the new ‘Diff’ view which displays the difference between several curves.

Check Old Version: Blue Cat’s All Plug-Ins Pack 2020.7 Full Version

Blue Cat’s AcouFiend

“Creative feedback is not evil” – Blue Cat’s AcouFiend is an acoustic feedback simulator plug-in that can make your guitars scream, growl, or sing, even at low volume or through headphones, and it gives you total control over it!

Blue Cat’s Axiom

“The next generation: your axe beyond the limits” – Blue Cat’s Axiom is a powerful and open multi effects processor and amp simulation software for guitar and bass. Based on the acclaimed Destructor plug-in for amp simulations, Axiom offers an infinite number of exceptional tones for your axe.

Blue Cat’s DP Meter Pro

“A unique audio meter and side chaining tool” – Blue Cat’s DP Meter Pro (DPMP) is a unique audio analysis tool that combines very flexible and customizable audio meters with advanced side chaining control capabilities thanks to its MIDI and automation outputs.

Blue Cat’s Destructor

“The distortion and amp sims factory that goes to 11, and beyond!” – Blue Cat’s Destructor is a powerful distortion and amp sim modeling tool capable of simulating any kind of distortion: from harsh digital destruction to smooth compression or guitar amp simulation (works for clean tones too!), and most importantly, yours!

Blue Cat’s Dynamics

“The most flexible all-in-one dynamics processor” – Blue Cat’s Dynamics is a full featured dynamics processor: it can be used as a compressor, limiter, gate, expander, waveshaper or all at once! The dynamics response of the plug-in can be tweaked with a unique two-thresholds system, and provides detailed visual feedback about its behavior.

Blue Cat’s FreqAnalyst Multi

“A unique multi-track spectral analysis tool for mixing or mastering.” – Blue Cat’s FreqAnalyst Multi is a unique multiple tracks real time spectrum analyzer: it lets you visualize the spectral content of several audio tracks on the same screen with extreme smoothness and high resolution, for both time and frequency.

Blue Cat’s FreqAnalyst Pro

“A powerful spectral analysis tool and automation generator with 3D viewer.” – Blue Cat’s FreqAnalyst Pro is a real time spectrum analyzer with advanced functionalities. It uses the same smooth algorithms as its little brother (Blue Cat’s FreqAnalyst free plug-in): it has been designed to provide extreme smoothness and high resolution for both time and frequency.

Blue Cat’s Hot Tuna

“Tuning with cat ears” – Blue Cat’s Hot Tuna is a high precision chromatic tuner plug-in that can dim or mute the signal when active. The reference frequency can be adjusted to support any type of tuning.

Blue Cat’s Late Replies

“The Creative Delay & Reverb Workstation” – Blue Cat’s Late Replies is a powerful delay, reverb and multi effects plug-in that can be indefinitely extended by hosting third party VST, VST3 or AU plug-ins anywhere in the signal path.

Blue Cat’s Liny EQ

“Linear phase equalization, without the latency.” – Blue Cat’s Liny EQ is an 8 bands linear phase equalizer with very low latency and comprehensive visual feedback: thanks to its highly optimized linear phase kernel, it processes the signal without phase distortion, with an unusually short latency (less than 3 milliseconds).

Blue Cat’s MB-5 Dynamix

“Multiband dynamics processing revisited.” – Blue Cat’s MB-5 Dynamix is an extremely powerful all-in-one multiband dynamics processor: it can be used as a multiband compressor, limiter, gate, expander, waveshaper or all combined at once, on any part of the spectrum.

Blue Cat’s MB-7 Mixer

“The multiband mixing console and VST/AU host with built-in effects.” – Blue Cat’s MB-7 Mixer is a unique plug-in that splits the signal into several frequency bands and lets you re-mix and process them as if they were separate tracks: change levels, apply panning, add built-in effects, or even third party plug-ins.

Blue Cat’s Oscilloscope Multi

“The all-at-once waveform visualizer and comparator.” – Blue Cat’s Oscilloscope Multi is a unique multiple tracks real time waveform renderer and comparator: it lets you visualize the content of several audio tracks on the same screen and compare them thanks to its X-Y view.

Blue Cat’s Parametr’EQ

“The best of both worlds” – Blue Cat’s Parametr’EQ is a 7 bands parametric equalizer combining the advantages of both the digital and analog worlds. Its special non-linear and oversampling features let you easily simulate the compression and distortion that may occur in an analog EQ or on the contrary obtain a very clean and…

Blue Cat’s PatchWork

“The virtual patchbay for audio plug-ins” – Blue Cat’s PatchWork is a universal plug-ins patchbay and multi FX that can host up to 64 VST, VST3, Audio Unit or built-in plug-ins into any Digital Audio Workstation (DAW) in a single instance, with both serial and parallel routing options.

Blue Cat’s Plug’n Script

“Craft your own effects and instruments” – Blue Cat’s Plug’n Script is an audio and MIDI scripting plug-in and application that can be programmed to build custom effects or virtual instruments, without quitting your favorite DAW software.

Blue Cat’s Protector

“A brick wall for your master buss.” – Blue Cat’s Protector is a 0 dB stereo brickwall limiter with adjustable dynamics response. It will typically find its place on the master bus of your DAW to protect your audio output from overshoot, limit the general volume and improve the perceived loudness,

Blue Cat’s Re-Guitar

“One guitar, an infinite number of tones” – Welcome to the world of “Re-Guitaring”: enjoy an infinite number of guitar tones out of a single instrument! With Re-Guitar, you can emulate many kinds of guitar tones (electric or acoustic), regardless of the solid body guitar model used for recording: keep playing your own guitar and …

Blue Cat’s Remote Control

“The Virtual Control Surface for your Virtual Studio” – Blue Cat’s Remote Control is a set of plug-ins which let you control and monitor in real time several MIDI controllable plug-ins or devices from a single customizable user interface.

Blue Cat’s Stereo Parametr’EQ

“The best of both worlds, in stereo!” – Blue Cat’s Stereo Parametr’EQ is a 7 bands parametric stereo equalizer based on Blue Cat’s Parametr’EQ technology, providing the best of the analog and digital worlds in stereo.

Blue Cat’s StereoScope Multi

“A unique multi-track stereo analysis tool for mixing and mastering.” – Blue Cat’s StereoScope Multi is a unique tool to compare the stereo image of several tracks in real time. It is the ideal solution for mixing: you can actually see which part of the stereo field every single instrument uses.

Blue Cat’s StereoScope Pro

“Detailed stereo image analysis with 3D visualization.” – Blue Cat’s StereoScope Pro is a real time stereo field analyzer with multiple views and MIDI/automation output capabilities. It is a powerful help to analyze how the audio signal is spread in the stereo field, and you can easily detect potential phase and mono compatibilities issues.

Blue Cat’s Widening Parametr’EQ

“A powerful multi-band processor for stereo widening and narrowing” – Blue Cat’s Widening Parametr’EQ is a 7 bands parametric Mid-Side equalizer based on Blue Cat’s Parametr’EQ algorithms, enabling you to widen or narrow the frequencies of your choice.

System Requirements

Mac

  • AAX
  • Audio Unit
  • RTAS
  • VST

Windows

  • AAX
  • DX
  • RTAS
  • VST
  • x64-AAX
  • x64-DX
  • x64-VST

Download Here


LEAVE A REPLY

Please enter your comment!
Please enter your name here